7.
MIDI to CV Interface
The DELTA CEP A has a MIDI input and a dedicated MIDI to CV interface to convert the
incoming MIDI signals into control voltages for external modules. Wiring of these control
voltage outputs to inputs of the DELTA CEP A sections is not required as such connections
are already internally wired. Rather, use these outputs for additional modules that you want
to connect to the DELTA CEP A.
Setting up note priority and trigger modes
Button
Knob/Button
Description
- - -
SHIFT
Hold down the [SHIFT] button to enter the utility menu. You
must hold the button until all LEDs 1-8 are lit blue. If you now
release the [SHIFT] button, you have entered the utility menu.
- - -
BIG KNOB
Select the third submenu with the big knob. LED 3 lights up
yellow in this selection.
- - -
DENSITY
With the Density knob you can call up the 6 di
ff
erent
combinations of note priority and trigger mode from the table
above. The lower 3 options work with single trigger and the
upper three options work with Multitrigger.
- - -
SHIFT
Use the [SHIFT] button to exit the utility menu.
von
48
63
LEARN
MIDI IN
MIDI2CV
Summary of Contents for DELTA CEP A
Page 1: ...Owner s Manual DELTA CEP A...
