3.7.6 FX-Section In- and Outputs
4.
Patches & Snapshots
The DELTA CEP A allows for the storage of 40 sound programs (patches), each with up to 8
snapshots. Snapshots are variations of a sound program. Snapshots can be slight
variations in the sound program or completely different sounds. Snapshots can be
accessed in a variety of ways. While sound programs can only be called up by selecting a
sound in patch mode, snapshots can be selected according to the keyboard velocity,
blended via modulation wheel or aftertouch, or invoked or morphed using an LFO.
Morphing snapshots is one of the core elements of the DELTA CEP A, unique in the world
of synthesizers. Sequencer fans will be pleased that the DELTA CEP A can trigger
snapshots in a way like a step sequencer and will generate gate signals for the ADSR
envelope. This allows you to play 8 different snapshot sounds one after the other as a
looped sequence. We will have a closer look to this feature later ;-) (Chapter 4.5 Snapshot
morphing)
4.1.
Storing of Snapshots
Storing snapshots on the DELTA CEP A is simple. Set a sound, select a snapshot memory
with the big knob (already used snapshots will light up green) and tap the [SNAP] button.
You have now taken a snapshot. If you want the snapshot to be saved permanently, even
after switching the Delta off, you must save a Patch. (chapter 4.2).
4.2
Storing Patches (sound programs)
When you save a patch (sound program), you store up to 8 snapshots permanently in
memory. The DELTA CEP A has 40 patches. In order to save a patch, you must first switch
Inputs and outputs of the FX section. These ports are also available on the rear
panel with 6,3mm instrument jacks on the desktop synthesizer version of the
DELTA CEP A.
Jack
Input/Output Description
OUTPUT L
Output
The two outputs at the bottom of the FX section are the
sum outputs of the DELTA CEP A. You pick up not only the
e
ff
ect signal but also the synthesizer signal at this output.
You can adjust the proportion between the dry synthesizer
signal and the e
ff
ect signal as described above with the
[DRY/WET] control. The level of this output can be
controlled with the VOLUME control in the VCA section.
OUTPUT R
Output
FX-IN L
Input
The e
ff
ects unit of the DELTA CEP A is a stereo e
ff
ects unit.
Because of this, you can feed a stereo signal directly into
the e
ff
ect section of the DELTA CEP A in the VCA section.
The two inputs on the desktop model are also on the rear of
the device as 6.3 mm jacks.
FX-IN R
Input
Storing of Snapshots
Button Knob/Button
Description
- - -
BIG KNOB
Select the snapshot memory you want to save the snapshot
in.
SNAP
- - -
Tap the [SNAP] button to save the snapshot.
von
35
63
Summary of Contents for DELTA CEP A
Page 1: ...Owner s Manual DELTA CEP A...