RADICAL DELTA CEP A, Owner'S Manual

Page: 33 / 63

3.7.2 Tempo Delay
3.7.3 Chorus
Knobs of the FX section after selecting the Tempo Delay mode.
Button Knob/Button Description
SHIFT
FX-SELECT
While holding down the [SHIFT] button, use the FX SELECT
knob to select the tempo delay algorithm. Make sure that LED
2 on the left side lights up when dialing.
- - -
TIME
After selecting the Tempo Delay algorithm, settings of the
delay time are quantized to note values. Therefore, the delay
time setting in this mode is not continuous. It depends on the
note values at the current tempo. You can change the tempo
at any time by tapping quarter notes on the tempo button.
You'll see how the tempo LED adapts to your typing. In MIDI
sync mode, the delay time changes according to the MIDI
clock.
- - -
FEEDBACK
Here you set the number of echo repeats.
- - -
DRY/WET This knob adjusts the Dry/Wet ratio of the output signal.
SHIFT
MOD-RATE
The Tempo Delay allows the modulation of the delay time with
a built-in LFO. Hold down the [SHIFT] button and set the
desired modulation speed with the MOD RATE knob.
SHIFT
MOD-DEPTH
Bei gehaltener [SHIFT]-Taste können Sie mit dem MOD-
DEPTH-Regler die Stärke der Delaytime-Modulation einstellen.
Knobs of the FX section after selecting the Chorus mode.
Button Knob/Button Description
SHIFT
FX-SELECT
Hold the [SHIFT] button and select the chorus algorithm with
the FX Select knob. Make sure that LED 3 on the left side
lights up while dialing the algorithm.
- - -
TIME
Here you set the average delay time of the three modulated
delay lines for the chorus e
ff ect.
- - - FEEDBACK
Here you control the feedback of the delay lines to give the
chorus a more metallic and intense e
ff ect.
- - - DRY/WET
This knob adjusts the Dry/Wet ratio of the output signal.
SHIFT
MOD RATE
While holding down the [SHIFT] key, use the MOD RATE knob
to adjust the chorus modulation speed.
SHIFT
MOD DEPTH
While holding down the [SHIFT] key, use the MOD DEPTH
knob to adjust the chorus modulation depth.
von 33 63