INSTALLATION INSTRUCTIONS
RK 100 - RAD - ING - MAN.INST - 1311.1 - DIGITECH CS MIAH4
19
3.5.3 Installation Frame - Individual installation
Prior to fixing the appliance to the wall, pay the maximum attention to the installation of the
installation frame. The frame must be based on a plane surface and it must be perfectly installed at
right angels. Incorrect boiler grades can provoke a wrong condensate discharge through the
condensate drain pipe and the consequently condensate stagnation inside the heat exchanger. A
correct frame installation assures a counterslope of about 4° compared to wall perpendicular line.
To install the frame and than the boiler, proceed as follows:
a.
Make sure that the wall and the floor form a right angel;
b.
Fix the lateral profiles
3
and
4
to the vertical brackets
1
and
2
;
c.
Fix the vertical brackets
1
and
2
to the horizontal bracket
6
;
d.
Fix the central and bottom brackets
7
and
8
;
e.
Once the assembling has been completed, place the frame by fixing it to the wall
9
and to the floor
10
;
f.
Install the boiler on the frame by using the apposite hooks
11
and complete the installation with the hydraulic
components mounting.
e
f
d c b a
f
Fig. 1
