RadiaCode 10 Series, User Manual

Page: 12 / 42

10
© 2023 Radiacode Ltd.
Stand-alone use of the device
3 Stand-alone use of the device
Portable dosimeter personal radiation detector Radiacode-10X series is designed to assess the radiation
situation in real time. In addition, the instrument automatically keeps a log of measurement results and
events. This makes it possible to analyze them, including with the help of standard software on a
smartphone or personal computer. The dosimeter is suitable for work on the ground, with samples of
construction materials, with specially selected and prepared food or soil samples.
Radiacode-10X series is designed for long-term autonomous use. Results at any moment can be
presented in the form of dose rate estimation, count rate, accumulated dose, absorbed radiation energy
spectrum. Assessment and accumulation of data do not depend on the change of display mode.
The instrument allows storing the accumulated data in the internal memory up to thousand last hours of
observations.
In addition to autonomous operation personal radiation detector can be connected to a personal
computer via USB cable or to an Android or iOS smartphone via Bluetooth. Connection to an Android
smartphone is also possible via USB OTG. When connected to a computer or smartphone, the
accumulated data are transferred to an external device, and the newly received data are transferred there
immediately without being stored in the built-in memory.
To connect the device to a computer it is necessary to install software Radiacode.
The program is available for download at https://space.radiacode.com .
With the help of the program Radiacode you can transfer data to a computer, view it and manage it
personal radiation detectorом.
For a detailed description of the program interface, see in chapter
"Working with the use of a computer" .
To work with a smartphone install the app on it Radiacode,
available at https://space.radiacode.com and GooglePlay,
or use the QR code:
3.1 Before use
Note: If you brought the package with the device from frost to a warm room, leave it to warm up
for two hours without opening. Otherwise, moisture may condense inside the device and cause
the device to malfunction.
Moisture penetration into the device will void the manufacturer's warranty.
First steps:
·
take the device out of the package;
·
make sure it is intact;
·
read the instructions;
·
check the completeness according to the product passport;
·
check the availability and correctness of filling in the passport/warranty card;
·
fully charge the battery .