RadiaCode 10 Series, User Manual

Page: 17 / 42

Stand-alone use of the device 15
© 2023 Radiacode Ltd.
·
establishment of communication via Bluetooth;
·
registration of radiation quantum;
·
exceeding alarm thresholds;
·
low battery warning;
·
response to the "Search for device" request.
Vibration can be accompanied by:
·
switching the device on and off;
·
pressing the button;
·
exceeding alarm thresholds;
·
response to the "Search for the device" request.
Light indication:
·
battery charging - blue color, continuous glow;
·
registration of radiation quantum in normal conditions - green color, flash;
·
registration of radiation quantum in case of alarm - red color, flash;
·
exceeding the alarm threshold - switching on the screen backlight.
It is possible to turn signals on or off the alarms by separate groups:
·
all sounds;
·
button pressing sound;
·
sound of radiation quantum registration;
·
all types of vibration;
·
light indication.
3.7 Battery charging
To charge the battery:
·
plug the USB cable to the connector located at the end of the device ([14] in the general view );
·
plug the USB cable to the connector of a computer or a special charger;
·
leave the device connected to the charging source until it is fully charged.
The indicator of the activity of the charging process is the glowing of the blue indicator ([18] in the general
view). If the device is turned on, then the screen displays the icon ([3] in the general view). At the end of
the charging procedure, the blue indicator will turn off and the icon will change to the sign of power
supply from an external source.
Pay attention to the charge indicator icon while using the device. If the charge indicator is empty
,
then connect the device to the charger.
Attention! Use only dedicated chargers or a computer USB port to charge the device. Connecting
the device to the wrong charging source may damage it. A device damaged as a result of
improper charging is not eligible for warranty repair.
3.8 Firmware update
The device is constantly being improved and the firmware (built-in software) is regularly updated by the
developer company. The current version of the device firmware is available through the Device info menu
item.
To update the firmware take the following steps:
·
download the latest version of Radiacode software at https://space.radiacode.com ;
·
install Radiacode on your computer and run it;
·
connect the device directly to your computer's USB port using the USB cable type-C (supplied with the
device);
·
turn on the device;
·
if there is a fresh version of the firmware, you will be prompted to update it;
·
wait for the update process to finish.
Update the firmware using your smartphone and the Android app: