RadiaCode 10 Series, User Manual

Page: 9 / 42

Safety precautions and warnings 7
© 2023 Radiacode Ltd.
2 Safety precautions and warnings
Read this manual carefully before using the device.
·
Keep the device out of the reach of children and pets!
·
Do not disassemble the device! Repair of the device is allowed only in certified service centers.
·
Do not use defective chargers! Use only dedicated chargers or USB port of computer to charge
the device!
A device damaged as a result of improper charging is not eligible for warranty repair.
·
Protect your device from extreme temperatures (below -20 ° C or above +45 ° C). Temperatures that
are too high or too low will reduce the capacity of the battery and shorten its life.
·
Avoid getting the device wet. Moisture can cause serious damage to the device. Moisture penetration
into the device will void the manufacturer's warranty.
·
If you brought the package with the device from frost to a warm room, leave it to warm up for two hours
without opening. Otherwise, moisture may condense inside the device and cause the device to
malfunction.
·
Do not use or store the device in dirty areas.
·
Avoid exposing the device to strong electromagnetic fields.The action of the electromagnetic field can
damage the device.
·
Mobile phones, electronic and household appliances can interfere with the operation of the device.
·
External shocks and rough handling can seriously damage the electronics of the device.
·
Do not grip the device strongly in your hand, press the buttons lightly.
·
Handle the device with care, the display is made of glass and can be broken if handled roughly.
·
Do not disconnect the device from the computer while the firmware is being updated. An attempt to
disrupt the download process may lead to a malfunction of the device, which can only be fixed by a
certified service center.
FCC warning.
Federal Communications Commission (FCC) Statement. This device complies with part 15 of the FCC
Rules. Operation is subject to the following twoconditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide Reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one ormore of the following measures:
·
Reorient or relocate the receiving antenna.
·
Increase the separation between the equipment and receiver.
·
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
·
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications made to this device not expressly approved by Radiacode LTD may
void the FCC authorization to operate this device.Note: The manufacturer is not responsible for any radio
or TV interference caused by unauthorized modifications to this equipment. Such modifications could
void the user’s authority to operate the equipment.