RadiaCode 10 Series, User Manual

Page: 24 / 42

22
© 2023 Radiacode Ltd.
Stand-alone use of the device
·
Short presses on the round button to select
[Enter] or [Esc] ;
·
Long press the round button to confirm your
selection.
·
To return to the previous level or exit the menu,
briefly press the up/down swing buttons to move
the focus to
[< Back] or [<< Menu quit] ;
·
Briefly press the round button to confirm your
selection.
3.10.5 Display settings
You can customize the screen properties to suit your needs.
You can select one of ten screen backlight brightness levels (0 to 9). The default setting is 5. Lower
levels use up battery power more slowly. The screen backlight will turn off automatically after a period of
time when no buttons are pressed. You can select a shutdown delay of 5, 10, 15, 30 seconds and 2, 5
minutes. The screen backlight can be disabled completely, allowed to be unconditionally turned on by
pressing the buttons or by pressing the button in case of insufficient light level.
By default the device is set in the mode of automatic screen rotation when working with it with right or left
hand. You can disable the automatic screen rotation option and select its orientation in the right or left
position.
·
Briefly press the up/down rocker buttons to move
the focus to
[Screen] ;
·
Short press the round button to move
to [Screen] .
·
Short press the round button to move to
[Backlight] ;
·
Briefly press the up/down swing buttons to move
the focus to
[Turning on] ;
·
Short presses on the round button to select the
backlight on mode:
[Auto] , [Never] , or [By Button] ;
·
Briefly press the up/down swing buttons to move
the focus to
[Duration] ;
·
Short press the round button to select the delay
until the screen backlight turns off automatically:
5 , 10 , 15 , 30 sec. and 2 , 5 min;