RadiaCode 10 Series, User Manual

Page: 27 / 42

Stand-alone use of the device 25
© 2023 Radiacode Ltd.
o
Vibration and light modes can be set in the same
way:
·
Move the focus to [Vibro] or [Light] by short
presses on the up/down swing buttons;
·
Short presses on the round button to select the
[On] or [Off] mode.
·
The presence of gamma and X-ray photon
registration clicks can be controlled separately.
·
By short presses on the up/down swing buttons
move the focus to the item
[Clicks] ;
·
Short presses on the round button to select the
[On] or [Off] mode.
·
Briefly press the up/down swing buttons to move
the focus to the
[Buttons] ;
·
Short press the up/down swing buttons to move
the focus to
[Buttons] or [Vibro] ;
·
Short press the round button to select the
desired response type.
o
Separately, you can control the presence of the
device connection and disconnection signal.
·
Briefly press the up/down swing buttons to move
the focus to
[Connection] ;
·
Short press the round button to select
[On] or [Off].
o
The presence of the on/off signal can be controlled
separately.
·
Short press the up/down swing buttons to move
the focus to
[Power] ;
·
Short press the round button to select
[On] or [Off].
·
To set the alarms, move the focus to [Alarms] ;
·
Press the round button briefly to confirm your
selection.