Frames format
List box: Format1,Format2,Format3,Format4,Format5
Default = Format1
One of the possible C24 Frames formats can be selected. According to the C24 protocol spe-
cification, it is possible to set Frames formats 1-4 for Protocol frames 1C-3C and formats 1-5
for 4C.
Important
The RipEX accepts only the set Protocol frames and Frames format combination.
All other combinations frames are discarded by the RipEX and not passed to the
application.
Local ACK
List box: Off, On
Default = Off
Available for Protocol frame 1C only. When "On", ACK on COM1(2) is send locally from this
unit, not over the Radio channel.
■
Cactus
Cactus is a serial polling-type communication protocol used in Master-Slave applications.
When a RipEX radio network runs in the Router mode, multiple Cactus Masters can be used within
one Radio network and one Slave can be polled by more than one Master.
Italicised
parameters are described in
.
There is not the possibility to set Broadcast address, since Cactus broadcast messages
always have the address 0x00. Hence when the Broadcast is On, packets with this des-
tination are handled as broadcasts.
Max gap timeout [ms]
Default = 30
The longest time gap for which a frame can be interrupted and still received successfully as one
frame. It should not be set below 10ms, while 15–40 ms should be OK for a typical Cactus protocol
device.
■
Comli
Comli is a serial polling-type communication protocol used by Master-Slave application.
When RipEX radio network run in Router mode, more Comli Masters can be used within one Radio
network and one Slave can be polled by more Masters.
Broadcasts packets are not used, so the configuration is using only some parameters described
.
RipEX Radio modem & Router – © RACOM s.r.o.
150
Advanced Configuration
Summary of Contents for RipEX
Page 2: ......
