Target address:
Destination address of matching packets (optional)
Target port(s):
Used UDP/TCP port range of matching packets
Redirect to:
Address to which matching packets will be redirected
Redirect port:
Port to which matching packets will be targeted
Outbound Rules
Outbound rules will modify the source section of IP packets and can be used to establish 1:1 NAT
mappings but also to redirect packets to a specific service.
Description:
A meaningful description of this rule
Map:
Choosing whether the rule applies to the host or to the network.
Outgoing interface:
Outgoing interface on which matching packets are leaving the router
Target
The target address or network to which matching packets are
destined.
Source address/ports:
Source address/ports of matching packets (if Map is set to "host")
Source network/netmask:
Source network/netmask of matching packets (if Map is set to
"network")
Rewrite to address/port:
Address/port to which the source address/port of matching packets
will be rewritten to
Rewrite to network/netmask:
Network/netmask to which the source network/netmask of matching
packets will be rewritten to
89
© RACOM s.r.o. – M!DGE2 GPRS/UMTS/HSPA+/LTE router
Web Configuration
Summary of Contents for M!DGE2
Page 2: ......
Page 188: ...188 ...
