WWAN Interfaces
This page can be used to manage your WWAN interfaces. The resulting link will pop up automatically
on the WAN Link Management page once an interface has been added. The Mobile LED will be
blinking during the connection establishment process and goes on as soon as the connection is up.
Refer to the troubleshooting section or log files in case the connection did not come up.
The following mobile settings are required:
Modem
The modem to be used for this WWAN interface
SIM
The SIM card to be used for this WWAN interface
Preferred service
The preferred service type
Please note that these settings supersede the general SIM based settings as soon as the link is being
dialed.
Generally, the connection settings are derived automatically as soon as the modem has been registered
and the network provider has been found in our database. Otherwise, it will be required to configure
the following settings:
Phone number
The phone number to be dialed, for 3G+ connections this commonly refers
to be *99***1#. For circuit switched 2G connections you can enter the fixed
phone number to be dialed in the international format (e.g. +420xx).
Access point name
The access point name (APN) being used
M!DGE2 GPRS/UMTS/HSPA+/LTE router – © RACOM s.r.o.
42
Web Configuration
Summary of Contents for M!DGE2
Page 2: ......
Page 188: ...188 ...
