This menu can be used to perform a firmware update of a specific module.
Update operation:
The update operation method being used. You can upload a firmware package
or download the files from a specific URL.
Module:
The module which shall be updated.
Storage:
The temporary storage which shall be used for the update procedure. For
boxes with limited amount of flash it is possible to use an USB stick which
must be properly set up in the USB section and hold a proper filesystem such
as ext4.
URL:
The server URL where the firmware files should be downloaded from. Sup-
ported protocols are TFTP, HTTP, HTTPS, and FTP (protocol://serv-
er/path/file).
Software Profiles
In every router you have two software profiles. One is active (currently used) and one is inactive. You
can easily switch between these profiles any time.
It can be for example useful when there is some issue with the newest firmware and you need to restore
the previous firmware version easily. Or you can just test some new features in the newest firmware
and then get back to the previous one.
7.7.4. Configuration
Configuration via the Web Manager becomes tedious for large volumes of devices. M!DGE therefore
offers automatic and manual file-based configuration to automate things. Once you have successfully
set up the system you can back up the configuration and restore the system with it afterwards. You
can either upload a single configuration file (.cfg) or a complete package (.zip) containing the configur-
ation file and a packed version of other essential files (such as certificates).
File Configuration
This section can be used to download the currently running system configuration (including essential
files such as certificates).
M!DGE2 GPRS/UMTS/HSPA+/LTE router – © RACOM s.r.o.
144
Web Configuration
Summary of Contents for M!DGE2
Page 2: ......
Page 188: ...188 ...
