Add Firewall Rule
Description:
A meaningful description about the purpose of this rule.
Action:
Whether the packets of this rule should be allowed or denied.
Log matches
Throw a syslog message if rule matches.
Incoming interface:
The Interface on which matching packets are received.
Outgoing interface:
The interface on which matching packets are received.
Source:
Source address of matching packets. Possible values are "ANY", "LOCAL"
(addressed to the system itself), "Group" or "Specify" (specified by an
address/netmask).
Destination:
The destination address of matching packets, can be "ANY", "LOCAL"
(addressed ... itself), "Group" or "Specify (specified by address/netmask).
Protocol:
Used IP protocol of matching packets.
Destination port(s):
Destination port of matching packets. You can specify a single port or a
range of ports here. Note that protocol must be set to UDP/TCP when
using port filters.
M!DGE2 GPRS/UMTS/HSPA+/LTE router – © RACOM s.r.o.
86
Web Configuration
Summary of Contents for M!DGE2
Page 2: ......
Page 188: ...188 ...
