When running in SNMPv3, it is possible to configure the following authentication settings:
Authentication:
Defines the authentication (MD5 or SHA)
Encryption:
Defines the privacy protocols to use (DES or AES)
In general, the admin user can read and write any values. Read access will
be granted to any other system users.
There is no authentication/encryption in SNMPv1/v2c and should not be used
to set any values. However, it is possible to define its communities and author-
itative host which will be granted administrative access.
Read community:
Defines the community name for read access
Admin community:
Defines the community name for admin access
Allowed host:
Defines the host which is allowed for admin access
Note
The SNMP daemon is also listening on WAN interfaces and it is therefore suggested to restrict
the access via the firewall.
7.6.11. Web Server
This page can be used to configure different ports for accessing the Web Manager via HTTP/HTTPS.
We strongly recommend to use HTTPS when accessing the web service via a WAN interface as the
communication will be encrypted and thus avoids any misuse of the system.
In order to enable HTTPS you would need to generate or upload a server certificate in the section
SYSTEM-Keys and Certificates.
M!DGE2 GPRS/UMTS/HSPA+/LTE router – © RACOM s.r.o.
126
Web Configuration
Summary of Contents for M!DGE2
Page 2: ......
Page 188: ...188 ...
