Link:
The WAN link to be monitored (can be ANY for all configured links).
Mode:
Specifies whether the link is monitored during the connection estab-
lishment or only when it is already up.
Primary host:
Reference host one which will be used for checking IP connectivity
(via ICMP pings).
Secondary host:
Reference host two which will be used for checking IP connectivity
(via ICMP pings). The test is considered successful if either the
primary or the secondary host answers.
Ping timeout:
Time for which the system is waiting for the ping response. With
mobile networks the response time can be quite long (several
seconds) in special cases. You can check the typical response using
SYSTEM – Troubleshooting – Network Debugging – Ping. The first
response typically takes a longer time than the following ones in
cellular networks, the Ping timeout should be set to the longer time
than with the first response.
Ping interval:
Time to wait before sending the next probe.
Retry interval (if ping failed):
If the first trial fails, ping hosts in this modified interval until the ping
is successful or the maximum number of failed trials is reached.
Max. number of failed trials:
The maximum number of failed ping trials until the ping check will
be declared as failed.
Emergency action:
Configure the Emergency action which should be taken after the
maximum downtime is reached. Using "reboot" performs the system
reboot. The option "restart services" restarts all link-related applica-
tions including the modem reset. No action is done if the "none"
M!DGE2 GPRS/UMTS/HSPA+/LTE router – © RACOM s.r.o.
34
Web Configuration
Summary of Contents for M!DGE2
Page 2: ......
Page 188: ...188 ...
