Important
Broadcasting is not supported with mobile networks.
PROTOCOLS IMPLEMENTED:
Within several protocols, parameter "Poll response control" can be set. Turn it off if using any kind of
port forwarding or VPN tunnels. Otherwise, it can be set to "On". More details about this parameter
can be found at
None
All received frames from the COM port as well as from the network are discarded.
Async link
The async link creates asynchronous link between two COM ports on different Units. Received frames
from COM are sent without any processing transparently to the mobile network to set the IP destination
and UDP port. Received frames from the mobile network are sent to the respective COM according to
the UDP port setting.
•
Parameters
○
Destination IP
This is the IP address of the destination Unit.
○
UDP port (Interface)
This is the UDP port number which is used as the destination UDP port in the UDP datagram in
which the packet received from COM is encapsulated.
C24
C24 is a serial polling-type communication protocol used in Master–Slave applications.
Multiple C24 Masters can be used within one network and one Slave can be polled by more than one
Master.
Italicised
parameters are described in
.
•
Protocol frames
List box: 1C, 2C, 3C, 4C
Default = 1C
One of the possible C24 Protocol frames can be selected.
•
Frames format
List box: Format1, Format2, Format3, Format4, Format5
M!DGE2 GPRS/UMTS/HSPA+/LTE router – © RACOM s.r.o.
56
Web Configuration
Summary of Contents for M!DGE2
Page 2: ......
Page 188: ...188 ...
