Rackable Systems OMNISTOR 4000f SERIES, User Manual

Page: 103 / 112

91
Appendix B
Port Information
This appendix contains pin signal information for the SES Controller Service Port, and the
SPF Transceivers installed in the Disk I/O cards.
SES Controller Card Service Port
Service port is provided to access the SES Controller using a standard null-modem cable.
Through this RS-232 service port you can use a VT-100 terminal or emulation such as
HyperTerminal, to access the onboard firmware for monitoring and maintenance, and
firmware update operations.
The SES Controller Service Port is located on the SES Controller Card and is labeled
“RS-232.”
SES Controller Card Service Port Pin Signals
1
1 NC
2 Rx
3 Tx
4 NC
5 Gnd
6 NC
7 NC
8 NC
9 NC
Pin Number S i g nal Name
2 3 4 5
6 7 8 9