![background image](http://html1.mh-extra.com/html/racal-instruments/1256e/1256e_manual_3132597109.webp)
1256E User Manual
Racal Instruments
©
2002
SCPI Command Basics 5-13
*CLS Clear status
*ESE Set the Standard Event Status Enable register
*ESE? Read the Standard Event Status Enable register
*ESR? Read the Standard Event Status register
*SRE Set the Service Request Enable register
*SRE? Read the Service Request Enable register
*STB?
Read the status byte
*SPE
Serial Poll Enable
These common commands are described below.
*CLS Command
The *CLS command clears the SCPI and IEEE-488.2 defined
status event registers. These include:
•
The
Standard Event Status Register
is cleared to 0. This
register is read using the *ESR? query.
•
The
Standard Event Status Enable Register
is cleared to 0.
This register is set using the *ESE command, and read
using the *ESE? query.
•
The
Service Request Enable Register
is cleared to 0. This
register is set using the *SRE command, and read using the
*SRE? query.
•
The
Operation Status Enable Register
is cleared to 0. This
register is set using the STATUS:OPERATION:ENABLE
command. This register can also be read using the
STATUS:OPERATION:ENABLE? query.
•
The
Operation Status Event Register
is cleared to 0 This
register is read using the STATUS:OPERATION:EVENT?
query.
•
The
Questionable Status Enable Register
is cleared to 0. To
set this register, the STATUS:QUESTIONABLE:ENABLE
command is issued. To read this register, the query
STATUS:QUESTIONABLE:ENABLE? indicates whether this
feature is enabled.