![background image](http://html1.mh-extra.com/html/racal-instruments/1256e/1256e_manual_3132597072.webp)
1256E User Manual
Computer Interfaces 4-8
Racal Instruments
©
2002
Setting the TCP/IP Address
1. Once you have selected the Manual Set Mode, you may set
the TCP/IP address. Press key 3 to select line 3. Rotate the
knob until line 3 appears as follows (line 4 may differ):
-----SETTINGS-----
Type: TCP/IP
> Option: IP_Oct_1 <
Status: 0
This prepares the 1256 to set the first octet (eight bits) of the IP
address.
2. Select line 4. Rotate the knob until line 4 (the Status line)
displays the first octet of your desired IP address. For example,
if you wish to set the IP address to “197.23.0.123”, rotate the
knob until line 4 shows the first octet, i.e. “197” (if line 4 already
shows the desired octet, then skip to the next step).
-----SETTINGS-----
Type: TCP/IP
> Option: IP_Oct_1 <
<Update?: 197
Then press key 4 again to confirm.
3. Select line 3. Rotate the knob until line 3 shows “IP_Oct_2” as
follows:
-----SETTINGS-----
Type: TCP/IP
> Option: IP_Oct_2 <
Status: 0
4. If line 4 does not already show the desired second octet of your
address, then select line 4. Rotate the knob until line 4 shows
the second octet of your address (for IP address
“197.23.0.123”, the second octet is “23”):
-----SETTINGS-----
Type: TCP/IP
> Option: IP_Oct_2 <
<Update?: 23
5. Press key 4 again to confirm.
6. Continue in this manner, setting the third and fourth octets of
your IP address.