![background image](http://html1.mh-extra.com/html/racal-instruments/1256e/1256e_manual_3132597052.webp)
1256E User Manual
Using the Front-Panel Controls 3-22
Racal Instruments
©
2002
settings, refer to
Chapter 4, COMPUTER INTERFACES
.
Setting Ethernet IP, Netmask, and Gateway Settings
For detailed instructions on setting Ethernet options, refer to
Chapter 4, COMPUTER INTERFACES
.
Setting the Display Format
The display may be set to display digital port data in
hexadecimal, decimal, or binary format. To set the display format,
proceed as follows:
1.
Press the top key. Rotate the knob until the top line reads:
>-----SETTINGS-----<
2. Select line 2 (next to top line) by pressing the second key.
Rotate the knob until line 2 of the display reads
“
Type:Display
:”
-----SETTINGS-----
> Type: Display <
Option: Intensity
Status: 75%
3. Press the third key to select line 3 of the display (option):
Rotate the knob until line 3 of the display reads as follows:
-----SETTINGS-----
Type: Display
> Option: Format <
Status: Hex
4. If line 4 already shows the desired format, then no further
action is necessary. Otherwise, select line 4. Then rotate the
knob until line 4 shows the desired format. This example
uses “Binary”:
-----SETTINGS-----
Type: Display
Option: Format
<Update?: Binary
Then press the fourth key (bottom) to update the status.
Pressing any other key cancels the change.