![background image](http://html1.mh-extra.com/html/racal-instruments/1256e/1256e_manual_3132597128.webp)
1256E User Manual
SCPI Command Basics 5-32
Racal Instruments
©
2002
Close
Power
relay channels 7 through 12:
CLOSE (@Power(7:12))
Closes relays on two modules:
CLOSE (@Power(8),matrix(102:104))
Removing Module
Names
The MODULE:DELETE command may be used to delete a single
plug-in module name from the list of known module names. The
MODULE:DELETE:ALL command may be used to remove all
presently defined module names.
The syntax for these commands is:
[:ROUTe]
:MODule
:DELete
<module
name>
:ALL
The following examples illustrate the use of this command.
Removes the name “scanner”:
ROUTE:MODULE:DELETE scanner
Removes the name “matrix”:
MOD:DEL matrix
Remove all names:
MOD:DEL:ALL
Reading the
Presently Defined
Module Names
The MODULE:CATALOG? command may be used to read back all
of the presently defined module names. The format for this
command is:
[:ROUTe]
:MODule
:CATalog?
The reply to this command consists of the presently defined
module names, separated by a comma. Module names are stored
internally in upper-case characters by the 1256. These upper-case
names are returned in the reply.