1256 User Manual Publication No. 980855 Rev. A
Getting Started 2-6
EADS North America Test and Services
contents of the next slot (slot 2):
----OPERATIONS----
>Slot 02: 1260-138A<
Channel: 0
Status: Open
The plug-in is 1260-138A.
4.
Continue to rotate the knob to view the contents of the remaining
slots.
If any of the installed switch modules do not appear on the display as
you scroll through the slot numbers, refer to
Appendix C,
TROUBLESHOOTING
to correct the problem.
To use the IEEE-488 or RS-232 interfaces to verify plug-ins, see
Chapter 5, SCPI COMMAND BASICS
. Look under the heading
Checking for Installed Plug-Ins
.
Closing a Relay
The front-panel controls may be used to close relays on the plug-
ins. For example, suppose a 1260-118 plug-in is installed in slot 3.
To close relay channel 4 on this plug-in, proceed as follows:
1.
Press the first key next to the display. Rotate the knob until
the top line reads:
>----OPERATIONS----<
2. Select line 2 (next to top line) by pressing the second key
(just below the first one). This highlights line 2 (indicated by
the “>” and “<” markers) so that you may select the slot to
work with:
----OPERATIONS----
>Slot 01: 1260-121A<
Channel: 0
Status: Open
3.
Rotate the knob until line 2 shows the contents of slot 3:
----OPERATIONS----
>Slot 03: 1260-118 <
Channel: 0
Status: Open
4.
Press the third key to select line 3 of the display:
----OPERATIONS----
Slot 03: 1260-118
>Channel: 0 <
Status: Open
5. Rotate the knob until line 3 shows the desired channel
number, which is 4 in this example:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com