1256 User Manual Publication No. 980855 Rev. A
Using the Front-Panel Controls 3-28
EADS North America Test and Services
To erase the entire non-volatile RAM, proceed as follows:
1.
Press the top key next to the display. Rotate the knob until the
top line reads:
>---STORE/RECALL---<
2.
Select line 2 (next to the top line) by pressing the second key.
Rotate the knob until line 2 of the display reads as follows:
---STORE/RECALL---
> Type: NVRAM <
Config: Image
Action: <select>
3. Press
the
fourth key to select line 4 of the display. If line 4
does not read
Erase All
, then rotate the knob until it does:
---STORE/RECALL---
Type: NVRAM
Config: Image
< Do?: Erase All
4. Press the fourth key (bottom) to erase the non-volatile RAM.
Pressing any other key cancels the operation and leaves the
memory intact.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com