1256 User Manual Publication No. 980855 Rev. A
SCPI Command Reference 6-2
EADS North America Test and Services
This example shows the following:
•
The ROUTE command keyword is optional, since it is
enclosed in square braces
•
The ROUTE command keyword may be specified as ROUTE
(long form) or as ROUT (short form), since the last character
is displayed in lower-case
•
The CLOSE keyword must be followed by a <channel list>. A
<channel list> represents any of a number of possible
channels in a variety of formats. The format for the <channel
list> and other command parameters are described in
Chapter 5: SCPI COMMAND BASICS
.
•
Since the ROUTE keyword is optional, and the CLOSE
keyword is shown indented from the ROUTE keyword, valid
commands consist of:
ROUTE:CLOSE
CLOSE
•
The command ROUTE:OPEN:ALL is a command only.
Therefore, the command ROUTE:OPEN:ALL? is not allowed.
Since they are NOT shown as command-only, the commands
ROUTE:CLOSE? and ROUTE:OPEN? are valid commands.
Table 6-1
contains a synopsis of the commands implemented by
the 1256. The maximum and minimum values and resolution are
shown for numeric parameters. The commands marked with an
asterisk (*) are NOT defined in the SCPI language. These
commands follow the SCPI syntax rules for implementing the
operation of the command.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com