Publication No. 980855 Rev. A 1256 User Manual
EADS North America Test and Services Getting Started 2-1
Chapter 2
Getting Started
Mounting Options
You may use the 1256 Switching System on a table or mount it in
a standard NEMA 19” rack. See
Appendix B, RACK MOUNTING
the 1256
for instructions on installing the rack mount kit (Option
60) and placing the 1256 in a rack.
Main AC Power
The 1256 Switching System requires a power input of 90VAC to
250VAC, 43Hz to 63Hz. The 1256 requires no adjustments,
settings, or changes in fuse capacity to accommodate variations of
voltage and frequency within these ranges. Simply connect the
1256 AC power inlet to the power source.
CAUTION:
Before connecting the unit to a power source, make sure that
the installed fuse has the capacity marked on the rear panel of
the 1256. For instructions on changing the fuse, refer to
Figure 2-1, Changing Fuse for Main AC Power.
Figure 2-1, Changing Fuse for Main AC Power
!
FUSE HOLDER
FUSE HOLDER
COVER
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
