- 15 -
O
PERATOR
´
S
M
ANUAL
F
ITIS
120 M
9901.00.20EN00 - 05/2015
4 P
REPARING
THE
TRACTOR
4.1 Required tractive power
The power required to tow your implement varies according to
WKHVRLOWH[WXUHWKHZRUNLQJFRQGLWLRQVDQGWKHWUDFWRUHTXLSPHQW
W\UHVIURQWEDOODVWHWF
7KHIROORZLQJWHFKQLFDOVSHFL¿FDWLRQVDUHSURYLGHGDVDJXLGH
For additional information, consult your dealer.
Number of bodies
Power
3
75 Hp
4
100 Hp
4.2 Tractor
wheels
4.2.1 Tractor
tyres
Check the general condition and the pressure of the tractor tyres
UHIHUWRWKHWUDFWRURSHUDWRUVPDQXDO7KHSUHVVXUHPXVWEH
identical on both sides of the tractor to ensure that the implement
is level.
IMPORTANT:
,QÀDWHWKHW\UHVWRWKHSUHVVXUHVVSHFL¿HGE\WKH
manufacturer.
4.2.2
Tyre spacing
2
2
1
1
Legend
1
Front tyre spacing
2
Rear tyre spacing
If the implement has a large number plough share pairs,
the wider the tractor's track, the better the tractor/implement
combination will perform.
To guide the tractor in the furrow, align the middle of the front
D[OHZLWKWKHPLGGOHRIWKHUHDUD[OH<RXZLOOWKXVDYRLGIULFWLRQRI
the front wheel on the ploughing face.
The offset adjusting cylinder or the offset mechanical arm (width
RIWKHVWIXUURZHQDEOHVWKHDGMXVWPHQWRIWKHLPSOHPHQWWRWKH
tractor.
The adjustment of the distance between tyres depends on the
working width of each body and the length of the offset arm.
On sloping ground, a large distance between tyres gives good
stability to the tractor/implement combination.
'LVWDQFHEHWZHHQUHDUW\UHV
-
min.: 1.30 m
-
PD[P
4.3 Ballasting the tractor
The implements hitched to the front and rear of the tractor may
QRWH[FHHGWKHWRWDOSHUPLVVLEOHORDGWKHSHUPLVVLEOHD[OHORDGV
DQGWKHW\UHVSHFL¿FDWLRQV
,WLVHVVHQWLDOWKDWWKHWUDFWRUVIURQWD[OHLVDEOHWRVXSSRUWDW
least 20% of the tractor's dead weight. If necessary, ballast your
tractor.
Before driving on the road, always make sure that the tractor is
not overloaded and that it is suitable for the hitched implement.
-
6SHFL¿FDWLRQVIRUFDOFXODWLRQ
IMPORTANT:
Weights are stated in kilograms (kg), lengths in
metres (m).
