- 20 -
O
PERATOR
´
S
M
ANUAL
F
ITIS
120 M
9901.00.20EN00 - 05/2015
7 P
REPARATION
OF
THE
IMPLEMENT
BEFORE
WORK
7.1 Location of adjustment points
ʈ
Locate the various adjustment points.
ʈ
Make sure that they are functioning properly and that they are
well lubricated. Perform the checks before setting out for the
¿HOGV
E.g.: 4-furrow Prima
5
1
4
3
2
Legend
1
Angle adjustment stop
2 Offset
adjustment
3
Plough body working width adjustment
4
Gauge wheel height adjustment
5
Alignment adjustment screw
7.2 Preparing the plough bodies before
ploughing
The bodies are protected against corrosion in the factory. Before
¿UVWXVHUHPRYHWKHSURWHFWLYHFRDWLQJRWKHUZLVHWKHVRLOPD\
stick and not slide on the mould boards.
Use a paint stripper to facilitate/speed up polishing of the mould
boards.
IMPORTANT:
Only use paint strippers in aerated and ventilated
areas.
