- 30 -
M
AINTENANCE
F
ITIS
120 M
9901.00.20EN00 - 05/2015
MAINTENANCE
CAUTION:
Observe the safety instructions (Chapter 2) before
starting service work or replacing spare parts.
• The operator and the owner are responsible for the
implement's maintenance.
•
Before commencing any work on the implement,
switch off the engine and remove the tractor's
ignition key.
• Risk of trapping or crushing injuries during
maintenance or cleaning.
• Stabilise the implement before performing any
maintenance or cleaning operations.
•
Make sure that the implement cannot be
inadvertently operated while carrying out
maintenance or cleaning work.
CAUTION:
Make sure that your safety is assured by the
techniques used to raise the implement.
CAUTION:
7\UHVPXVWEH¿WWHGDQGUHPRYHGE\TXDOL¿HG
personnel.
IMPORTANT:
The operator and the owner of the implement must
not under any circumstances tamper with or adjust
sealed components.
10 P
ROTECTION
OF
THE
ENVIRONMENT
10.1 Soil contamination
IMPORTANT:
Take care not to spread waste grease and
substances such as hydraulic oil on the ground or to
dispose of them in the drains.
IMPORTANT:
Collect the drained hydraulic oil in sealed, clean and
containers provided for this purpose.
10.2 Worn tyres
CAUTION:
It is prohibited to store, abandon, deposit tyres in
the environment or to burn them in the open air.
Take them to an approved dealer or collection point.
11 C
LEANING
Clean the implement.
ʈ
When cleaning with a high pressure cleaner, do not direct the
jet at joints, bearings etc. or at electrical components.
ʈ
3D\VSHFLDODWWHQWLRQWRVDIHW\VWLFNHUVDI¿[HGWRWKH
implement. Damaged or detached stickers must be replaced.
ʈ
Do not use compressed air to clean hydraulic components.
ʈ
Perform complete lubrication of the implement after each
cleaning.
12 I
NSPECTION
IMPORTANT:
Inspect implement after each use and perform the
required repairs.
ʈ
Check the general state of the implement :
-
The welds.
-
The wheels, tyres and the wheel studs.
-
The bolts of wearing parts under stony conditions (strong
YLEUDWLRQV
12.1 Checking the hydraulic system
CAUTION:
1(9(5SODFHDKDQGRYHUHVFDSLQJK\GUDXOLFÀXLG
Leaks must be located with a tool. Risk of injury
RULQIHFWLRQGXHWRK\GUDXOLFÀXLG+\GUDXOLFÀXLGV
escaping under high pressure are able to penetrate
the skin and cause serious, even fatal injuries.
CAUTION:
Your implement may be equipped with hydraulic
accumulators. These are pressurised and it
is dangerous and prohibited to remove the
accumulators or their piping. This operation may
RQO\EHSHUIRUPHGE\TXDOL¿HGSHUVRQQHOFRQVXOW
your dealer).
CAUTION:
Before working on the hydraulic circuit, set the
implement down on the ground and depressurise
the hydraulic circuit.
CAUTION:
1HYHUKHDWZHOGVDZJULQGRUÀDPHFXWFORVH
to hydraulic circuits or components or any
RWKHUÀDPPDEOHSDUWV)RUZHOGLQJZRUNRQWKH
implement, disconnect the tractor battery and
protect the hydraulic circuits so that they are not
damaged by welding sparks and spatter.
ʈ
&KHFNK\GUDXOLFKRVHVIRUZHDUGHWHULRUDWLRQRIWKHH[WHUQDO
VKHDWKZHDUHWF
ʈ
Check that couplings, components, etc. are securely
tightened.
