- 13 -
O
PERATOR
´
S
M
ANUAL
F
ITIS
120 M
9901.00.20EN00 - 05/2015
3.6 Headstock RH 80
1
2
Legend
1 Hitch
pins
2 Turnover
cylinder
The implement is equipped with a Ø80 mm shaft, mounted on
two tapered roller bearings of the same diameter.
3.6.1 Hydraulic
turnover
The implement is turned-over by means of a hydraulic cylinder
RSHUDWHGIURPLQVLGHWKHWUDFWRUFDE
3.7 Alignment
1
Orients the implement to align it with the tractor. Reduces
unnecessary lateral forces, makes the implement easier to pull
and improves the quality of ploughing.
3.8 Working
width
1
Legend
1
Plough body working width adjustment
The working width of the bodies can be set to three positions:
RUWRPSHUERG\
3.9 Gauge
wheel
1
Legend
1 Gauge
wheel
7KHJDXJHZKHHOFRQWUROVWKHZRUNLQJGHSWKRIWKHUHDURIWKH
implement.
