Rabe COMBIBIRD CB, Operator'S Manual

Page: 36 / 40

- 36 - RA_MA_DI_COMBIBIRD_CB_1510_EN
- 11/15
M
aintenance
cOMBiBiRD cB
fOlDing seMi
-
MOunteD veRsiOn
12.3 Lubrication and greasing
Location of lubricating nipples
i
IMPORTANT:
The location of lubrication nipples depends on the
various assemblies and options of your implement.
i
IMPORTANT:
Check the location of lubrication nipples using the
spare parts catalogue supplied with your implement.
E.g. Combibird CB 6.00 m folding semi-mounted
version with kompressor roller
5
8
6
7
2
3
4
1
9
10
11
12
13
14
Legend
1 Lubricating nipple on hitch
2 Lubricating nipple on link
3 Lubricating nipple on cylinder pins
4 Lubricating nipple on tine parallelogram
5 Lubricating nipple on undercarriage pivot pins
6 Lubricating nipple on cylinder pins
7 Lubricating nipple on cylinder pins
8 Lubrication nipples on roller shaft
9 Lubricating nipple on disc bearing
10 Lubricating nipple on cylinder pins
11 Lubricating nipple on cylinder pins
12 Lubricating nipple on tine parallelogram
13 Lubricating nipple on disc bearing
14 Lubricating nipple on cylinder pins
Regular lubrication of all moving parts ensures optimum
implement operation and prolongs service life.
The lubricating nipples on the pivot points enable lubrication of
the axles.
Before lubrication, clean the lubricating nipples from impurities
that could cause blockage of the lubrication duct. If a lubricating
nipple is clogged, worn or missing, dismantle it for cleaning or
replace it.
Check that the grease can flow.
Be careful not to over-grease during lubrication. Excess grease,
on contact with dust, forms an abrasive paste. Remove and wipe
away any spillage or build-up of grease.
∙ Under normal working conditions, grease every 25 working
hours.
∙ Under sever or intensive working conditions, grease every 12
working hours.