Rabe COMBIBIRD CB, Operator'S Manual

Page: 26 / 40

- 26 - RA_MA_DI_COMBIBIRD_CB_1510_EN
- 11/15
O
peratOr
'
s manual
COmBIBIrD CB
fOlDIng semI
-
mOunteD versIOn
7.4 Hydraulic braking
Use the tractor's hydraulic braking system to control the hydraulic
braking system of the implement.
1
Legend
1 Brake coupler
-
Connecting the hydraulic braking circuit.
∙
Check that the hydraulic coupler is clean before connecting.
∙
Connect the hydraulic coupler on the implement side and the
tractor side.
-
Disconnecting the hydraulic braking circuit.
∙
Disconnect the hydraulic coupler on the implement side and
the tractor side.
∙
Store the hydraulic hose in the hose cabinet.
7.5 Pneumatic braking
a
CAUTION:
The coupling heads must be connected in the
correct order.
i
IMPORTANT:
When connecting the brake and air supply lines,
ensure that:
- the sealing rings of the coupling heads are clean.
- the sealing rings of the coupling heads provide a
perfect seal.
- Immediately replace damaged sealing rings.
- Drain the water from the compressed air tank
before the first movement of the day.
- Before moving, wait for the tractor air pressure
reading to reach a minimum of 5.0 bar.
i
IMPORTANT:
First connect the brake line coupling head (yellow),
then that of the air supply line (red).
The implement's service brake is immediately
released when the red coupling head is connected.
i
IMPORTANT:
First disconnect the air supply line coupling head
(red), then that of the brake line (yellow).
The implement's service brake is immediately
applied when the red coupling head is removed
Use the tractor's braking system to control the pneumatic braking
system of the implement.