Qvis APOIR-PTZ23, User Manual

Page: 22 / 56

© Copyright Qvis® All documentation rights reserved.
14
6 Corner Mount Bracket Installation
6.1 Component Installation
Corner mount bracket and its components are shown below. See Figure 6-1.
Figure 6-1
6.2 Installation
6.2.1 Installation Requirements
The corner mount PTZ camera can be installed onto a hard construction wall in either indoor or outdoor
environment, where there is a 90 degrees angle to fix it to. Before the installation, please make sure:
1. The wall is thick enough to install the expansion bolt.
2. The wall can at least sustain the 4x weight of the PTZ camera.
6.2.2 Installation Steps
Please draw four holes position in the wall according to the holes of the corner installation accessories. See
Figure 6-2.
Figure 6-2
Then you can drill four holes and insert the M8 expansion bolts. Pull the power, video/control and the alarm
cables through the centre hole at the bottom of the corner bracket, through the waterproof adhesive, and through
the centre of the bracket. Please reserve the enough cable connection length and then use the M8 expansion
bolt to secure the corer mount bracket chassis to the wall. See Figure 6-3 to see a completed installation.
Installation hole