Qvis APOIR-PTZ23, User Manual

Page: 42 / 56

© Copyright Qvis® All documentation rights reserved.
34
PRESET
PAN
AUTO SCAN
AUTO CRUISE
AUTO PATTERN
IDLE FUNCTION
TIME TASK
NEXT PAGE
BACK
EXIT
DIGITAL ZOOM :ON
DIGITAL ZOOM LIMIT :3x
PICTURE FLIP :OFF
FREEZE FUNCTION
:OFF
STABALIZATION
CAMERA FACTORY DEFAULT
CAMERA RESTATRT
BACK
EXIT
10.4.3.6 Next Page
Move the cursor to NEXT PAGE and then click confirm button, you can go to the submenu.

DIGITAL ZOOM: You can use the left/right button to enable/disable the digital zoom function.

DIGITAL ZOOM LIMIT: This is to set the maximum digital zoom limit. Please use the left/right button on the
keyboard or in the PTZ camera terminal menu to set.

PICTURE FLIP: This function allows you to rotate the image up to 180 degrees. There are two options:
on/off. Please use the left/right button on the keyboard or in the PTZ camera terminal menu to set.

FREEZE FUNCTION: This function allows the system to go from one preset to another preset, without
showing the video during the PTZ movement. There are two options: on/off. Please use the left/right button
on the keyboard or in the PTZ camera terminal menu to set.

STABALIZATION: This is to set the anti-dither function. Please use the left/right button on the keyboard or
in the PTZ camera terminal menu to set.

CAMERA FACTORY DEFAULT SETTING: Move the cursor to current item and then click confirm button to
restore factory default setup.

CAMERA RESTART: Move the cursor to current item and then click confirm button to reboot the camera.

BACK: Go back to previous menu.

EXIT: Log out system menu.
10.4.4 Function Setting