Qvis APOIR-PTZ23, User Manual

Page: 51 / 56

© Copyright Qvis® All documentation rights reserved.
43
IR SENSITIVITY: 4
IR LIGHT CTRL: ZOOM PRI
NEAR LIGHT: 50
FAR LIGHT: 50
IR LIGHT COMP: 3
10.4.4.13 Menu Password

PASSWORD: There are two options: on/off. Please use the left/right button on the keyboard or in the
PTZ camera terminal menu to set.

SETTING: Click this to go to the next menu and then set the password.

BACK: Go back to the previous menu.

EXIT: Log out the system menu.
10.4.4.14 Heater Setting
Move the cursor to the HEATER item and then click the confirm button, you can go to the third menu.

HEATER SETTING: There are three options: AUTO/ON/OFF. Please use the left/right button on the
keyboard or in the PTZ camera terminal menu to set.

TEMPERATURE ENABLE: The heater is on when the PTZ camera internal temperature is below the
threshold you have set here.

TEMPERATURE DISABLE: The heater is off when the PTZ camera internal temperature is higher than
the threshold you have set here.

BACK: Go back to the previous menu.

EXIT: Log out the system menu.
10.4.5 IR Light Setup
Move the cursor to highlight IR LIGHT SETTING button and then click confirm button.

IR SENSITIVITY: Here you can enable the IR light sensitivity function.

IR LIGHT CTRL: There are three options: Zoom rate has the highest priority; height has the higher priority,
and Manual.

NEAR LIGHT: This is to set the medium and near light brightness.

FAR LIGHT: This is to set the far light brightness.

IR LIGHT COMPENSATION: This is the whole compensation level of the IR light.
HEATER SETTING
：
AUTO
TEMPERATURE ENABLE
：
03
TEMPERATURE DISABLE
：
12
BACK
EXIT
PASSWORD
：
OFF
SETTING
BACK
EXIT
PASSWORD
：
1 2 3 4 5
6 7 8 9 0
→
SAVE BACK