Qvis APOIR-PTZ23, User Manual

Page: 49 / 56

© Copyright Qvis® All documentation rights reserved.
41
10.4.4.10 Task Setting

WEEK: This allows you to set specified day or whole week. Please use the left/right button on the keyboard
or in the PTZ camera terminal menu to set.

START TIME: Here you can set the task begin time. Move the cursor to current item and then click the
confirm button to set the time. Please use the up/down button to set the detailed value and then use
left/right button to go to the next setup item. After you completed the setup, please click confirm button to
exit the start time setup and then move the cursor to the SAVE button to save current setup.

END TIME: Here you can set the task end time. Move the cursor to current item and then click confirm
button to set the time. Please use the up/down button to set the detail value and then use left/right button to
go to the next setup item. After you completed the setup, please click confirm button to exit end time setup
and then move the cursor to the SAVE button to save current setup.

TASK ACTION: The option here includes: NONE/TOUR/SCAN/PRESET/PATTERN. Please use the
left/right button on the keyboard or in the PTZ camera terminal menu to set.

TASK SN: This allows you to set the idle action serial number. Please use the left/right button on the
keyboard or in the PTZ camera terminal menu to set.

SAVE: After you have completed the above setup, you need to move the cursor here and then click confirm
button to save current time setup.

BACK: Go back to the previous menu.

EXIT: Log out the system menu.
10.4.4.11 Privacy Masking (Window blank)
Please make sure you current camera supports this function.
Move the cursor to PRIVACY ZONE and click confirm button, system goes to privacy mask setup interface.
There are maximum 8 privacy mask zones in 360 degrees .The tilt angle ranges from 0 to 70 degrees.
WEEK
：
ALL-WEEK
START TIME
：
00H00M
END TIME
：
00H00M
TASK ACTION
：
SCAN
TASK SN
：
001
SAVE
BACK
EXIT
PRIVACY NO
：
001
ACTIVATE : OFF
RESIZE
: ↑
DELETE
SAVE
BACK
EXIT