Qvis APOIR-PTZ23, User Manual, Page: 10 / 56

© Copyright Qvis® All documentation rights reserved.
2
1.2.5 Preset Setup and Call
Preset function is to save the address information (such as PTZ pan/tilt, focus and etc) to the memory so that
you can quickly adjust the dome and PTZ to the correct position. The camera supports a maximum of 255
presets in PELCO-D and PELCO-P protocols.
1.2.6 Auto Scan
Camera scans back and forth regularly along the horizontal field. Here you need to set left and right limit and
scan speed. You can set 5 scanning paths.
1.2.7 Auto Touring
Add addresses into a routine in a desired order and then set time and stop duration for each address. The dome
will begin an auto touring between these addresses. Each touring path can contain max 32 presets.
1.2.8 Auto Pattern
Memorises dome operations such as pan, tilt, and zoom to repeat. You can call it to repeat the previous
operation.
1.2.9 Privacy Masking
Privacy masking is a user-defined, four-sided area that cannot be viewed by you. The masking area will move
with pan and tilt functions and automatically adjust in size as the lens zooms.
1.2.10 IR Night Vision
Whilst set to night vision status, it can use the IR light to spot objects within the monitoring view. You can also
monitor the various environments in low illumination situations.
1.2.11 Action on Alarm
This camera supports three alarm activation operations. There are also 7 alarm inputs (NO/NC). Alarms can be
individually programmed to initiate an associated preset, scanning, or tour when triggered. Dome will return to a
previously programmed state after alarm acknowledgement or to its previous position before alarm.
1.2.12 Auto Flip
As long as you continue to hold the keyboard joystick in the down position, the dome rotates 180 degrees and
repositions itself for uninterrupted viewing of any subjects that passes directly beneath the dome.
1.2.13 Self-diagnosis
There is a self-diagnosis procedure when camera boots up.

Tilt and vertical engine check

Camera diagnostics

Displays dome information and diagnosis information such as address, protocol, baud rate.