Q150T Sample Preparation System
10473 - Issue 5
20
Q150T - Instruction Manual
3.3
System Settings
The operation of the Q150T is controlled by its profile parameters. However, there are
several
system parameters
, which can be changed without altering the profile. A system-
set parameter overrides the corresponding setting specified in the active profile. You can
make the new setting apply just to runs using the active profile or to all runs, irrespective
of the choice of profile.
To change a system parameter:
1.
Open
Profile Editor
: from the standby screen, tap on the
Edit Profile
button or
choose
Edit | Profiles
from the menu bar.
2.
Tap on the
+
sign to the left of the currently active profile (see Figure 3-5 - left).
Figure 3-5.
Listing system properties for a profile
3.
Tap on
System
.
System Property Editor
is displayed (see Figure 3-5 - right).
4.
You are prompted to confirm whether the changes are to be applied to runs using
this profile only or to all runs. Tap on the
Yes
button to apply changes to the active
profile only, or
No
to apply the change to all runs.
Figure 3-6.
Changing the Stage Rotate system property
5.
Tap on the value of the system property you want to change (in this case,
Stage
Rotate
). Amend the setting as required and confirm the change by tapping on the
OK
button. Tap on the
Cancel
button to cancel any change (see Figure 3-6).
6.
Altered system parameters are shown with blue text.
7.
Tap on the
OK
button to exit the
System Property Editor
.
Summary of Contents for Q150T S
Page 92: ......
