QuickCapture
The
QuickCapture
tool allows you to capture anything that is currently playing in the preview window,
into a single cue, which can then be dragged and dropped into the workspace for use later. Simply click
on the
QuickCapture
tab at the bottom of the screen and you will see the
QuickCapture
tool.
For example, if you are in
Multi-cue
mode, and you have three cues playing, you can capture that into a
single cue, so that next time you want to trigger the same three cues, you can do it by merely clicking on
a single cue.
The main features of the
QuickCapture
tool are shown and described in the picture below.
Displaying the capture momentarily
To send the output of the QuickCapture tool to the laser, simply click on the
Show it now
button.
Saving the QuickCapture to a cue
You can save the
QuickCapture
to a cue for permanent storage or for use later. Simply drag and drop
the preview window (or the
QuickCapture
tab itself) to a cue.
68
Summary of Contents for FB3-QS
