Creating new content or editing existing content
within a cue
You can create new content, or edit the existing content in any cue by right-clicking on the cue and
selecting either "Create" or "Edit".
Right-clicking on the cue also allows you to copy the content of a cue onto the Windows clipboard,
where they can then be pasted into other pages.
Previewing contents of each Cue
You can preview the contents of each cue by simply hovering the mouse pointer over a cue. This will
give you an accurate representation of what the cue does.
Laser Preview Window
The
Laser Preview Window
in QuickShow is always active, and is found in the upper right corner of
the
Main Control Window
.
In addition to simply showing the current laser output, the
Laser Preview Window
also provides
additional controls, as shown and explained in the picture below.
42
Summary of Contents for FB3-QS
