manualshive.com logo in svg

QuickLabel Systems QL-300, User Manual, Page: 216 / 485

Share
Download
QuickLabel Systems QL-300 User Manual Download Page 216

Adjusting the Color

QL-300 User Guide

216

 

5

Press the 

ON LINE

 button to return to the standby screen.

Adjusting Density Manually

The printer can implement compensation periodically using auto density compensation mode, 
but if the print density is noticeable, it can also be compensated manually.

Density adjustment values are set by specifying Cyan Density, Magenta Density, Yellow 
Density, Black Density, and White Density* values with the control panel.

*: This item available only on the QL-300

1

Press the 

Fn

 key.

The numerical values input screen will be displayed.

2

Press 

3, 0, 0

 (function numbers) and press the 

OK

 button.

Summary of Contents for QL-300






































































































































































































































































































































































































































































































Reviews:

No comments