qubev smart EVON0090 Installation & Operation Manual Download

Page: 44 / 44

QUBEVSM-V01-R0 B QubEV Smart Installation & Operation Manual A5 - EN

THIS DOCUMENT CONTAINS INFORMATION THAT IS SUBJECT TO CHANGE WITHOUT NOTICE.

The latest version of this publication can be downloaded at http://qubev.co.uk

Illustrations of the product and user interface are for marketing purposes only.

Brand names, logos and trademarks used herein remain the property of their respective owners.

This listing of any firm or their logos is not intended to imply any endorsement or direct affiliation

with ONE STOP EUROPE LTD. and is purely to demonstrate branding opportunities.

www.qubev.co.uk

UK Office:

[email protected]

www.evonestop.co.uk

One Stop Europe Ltd, Ralphs Lane, Frampton

West, Boston, Lincolnshire, PE20 1QU

Europe:

[email protected]
www.evonestop.com

Eurotech Sire System AB, Mallslingan 20A,
187 66 TÄBY, Sweden

Main Property Fuse/Circuit

Breaker Rating

Rating =

Amps

Charge Point Output Rating

Rating =

Amps

Factory Default = 32A
Options are 10A, 13A, 16A, & 32A

Summary of Contents for smart EVON0090













































Search results

Summary of Contents for smart EVON0090

Reviews:

Related manuals for smart EVON0090

Brands by name

Popular brands

qubev smart EVON0090, Installation & Operation Manual

Search results

Summary of Contents for smart EVON0090

Reviews:

Related manuals for smart EVON0090

Brands by name

Popular brands