Technical Guide: RDMS Telnet and Serial Control
63
Quasonix, Inc.
N
–
Normal
C
–
CSV
<r> - Sets display rate to <r>
Valid range is 100 to 60000 ms (500 ms if not specified)
Options:
-h
–
Do not display header
PL [HEAD <f>]
–
Shows system status header in format <f>
where:
<f> - Format (last used, if not specified)
N
–
Normal
C
–
CSV
Examples:
PL
Input dBm Atten dB Signal dBm Adj dBm Eb/N0 dB Saturation
60.48 59.750 -3.43 13.03 27.30 0
Power leveling automatic
Power leveling active
Power level target power 13.00 dB
Power level scale 0.00 dB
Power level measurement noise
Power level filtering enabled
PL 0
Set the current power level information tracking display to Off
PL 1
Set the current power level information tracking display to On
PL C A
–
Sets power level automatic control mode
Examples:
PL C A 0
Set the power level automatic control mode to Software
PL C A 1
Set the power level automatic control mode to Hardware
PL F
–
Sets the average and adjusted power level filter coefficient
Example:
PL F 5
Set the power level filter coefficient to 5
Valid range is 1 to 16
PL M
–
Sets the power level measurement type
