![background image](http://html2.mh-extra.com/html/quasonix/rdms/rdms_technical-manual_3540276038.webp)
Technical Guide: RDMS Telnet and Serial Control
37
Quasonix, Inc.
{1|-} - Active low (inverted)
2.1.1.8
Low Speed Mixer Control - ALM
The ALM command displays and controls low speed (ACU) output mixer settings
ALM [<f>|<c> [<e>]]
- Sets low speed (ACU) mixer parameters
<f> - Sets mixer frequency for ALL channels to <f>, -100.0000 to 100.0000 kHz
<c> <e> - Sets channel <c> mixer enable to <e>
where:
<c> - Channel to set enable
A - Channel A (AM)
B - Channel B (Aux Analog A Out)
C - Channel C (AGC)
D - Channel D (Aux Analog B Out)
<e> - Enable
0 - Disabled
1 - Enabled
Examples:
ALM x
Sets mixer frequency for all channels in MHz
Valid range is -46.6667 to 46.6667 MHz
ALM c x
Sets a specific channel (c) mixer to enabled or disabled
Valid channel mixer values are A, B, C, or D
For example:
ALM B 1 sets channel DAC B to Enabled
ALM D 0 sets channel DAC D to Disabled.
ALM
low speed (ACU) mixer at 0.0000 kHz
Channel A (AM) mixer disabled
Channel B (Aux Analog A Out) mixer disabled
Channel C (AGC) mixer disabled
Channel D (Aux Analog B Out) mixer disabled
2.1.1.9
Lock Status Command - AL
The Lock Status command reports the system lock status.
Example:
AL