Technical Guide: RDMS Telnet and Serial Control
15
Quasonix, Inc.
CH1
–
Channel 1
INT
–
Internal
where:
<e> Enable
0
–
Disabled
1
–
Enabled
BCS
NOT in
AQPSK mode
Displays and controls best channel selector settings
BCS [<e>]
–
Sets best channel selection enable for data <e>
where:
<e> - Enable
0
–
Disabled
1
–
Enabled
2.1.1.2
Antenna Control Unit - ACU
The ACU command displays and controls the antenna control unit settings.
ACU [M <m>|C <e>|O <s>]
M <m> - Sets antenna control mode to <m>
where: <m> - Control mode
M - AGC time constant and AM bandwidth set manually
S - AGC time constant and AM bandwidth set based on antenna scan
C <e> - Sets AGC compensated AM enable to <e>
where: <e> - Enable
0 - Disabled
1 - Enabled
O <s> - Sets antenna control output to <s>
where: <s> - Signal source
0 - Channel 0
1 - Channel 1
C - Combiner
ACU [S [T <t>|R <r>]] - Antenna scan settings
