Technical Guide: RDMS Telnet and Serial Control
53
Quasonix, Inc.
•
Square brackets '[' and ']' indicate optional parameters:
MO [<m>] - MO command followed by optional value parameter <m>
•
Vertical bars '|' indicate a choice of parameters:
AGC [M <m>|<e>]
AGC command followed by optional M control parameter followed by the <m> value parameter OR
AGC command followed by just the <e> value parameter.
•
Braces '{' and '}' indicate a required value:
DDT [P {<s>|<p>}]
DDT command followed by optional command control parameter 'P'. If the 'P' command control parameter
is used it is followed by a required <s> OR <p> value parameter.
A complex example:
AGC BA [<e>|V <a>|I|O <t> [A]]
The AGC command followed by the BA command control parameter, followed by one of:
<e> value parameter
OR
the V command parameter followed by the <a> value parameter
OR
the I or O command parameter followed by the <t> value parameter followed by an optional A
command parameter
2.1.1.27 HyperTrack
–
HT
Displays and controls HyperTrack settings
HT [<e>|DR <r>|RSSI <d>|DQM <d>]
<e> - Sets adaptive equalizer enable to <e>
where: <e> - Enable
0 - Disabled
1 - Enabled
[DR <r>]
- Sets data rate to <r>, 0.1152 to 40.0000 MHz
[RSSI <d>]
- Sets RSSI decimation rate to 2^<d>, 0 to 15
