Technical Guide: RDMS Telnet and Serial Control
58
Quasonix, Inc.
{8|UQPSK} - Unbalanced Quadrature Phase Shift Keying
{9|DPM} - Digital Phase Modulation
{11|STC} - Space Time Coding
{12|SOQPSK/LDPC} - Shaped Offset Quadrature Phase Shift Keying With LDPC
{13|STC/LDPC} - Space Time Coding With LDPC
Examples:
MO
Mode PCMFM - Pulse Code Modulation/Frequency Modulation
MO 0 Set modulation to PCM/FM
MO 1 Set modulation to SOQPSK-TG
MO 2 Set modulation to Multi-h CPM
MO 3 Set modulation to BPSK
MO 4 Set modulation to QPSK
MO 5 Set modulation to AQPSK
MO 6 Set modulation to AUQPSK
MO 7 Set modulation to OQPSK
MO 8 Set modulation to UQPSK
MO 9 Set modulation to Digital PM (DPM)
MO 11 Set modulation to Space Time Coding (STC)
MO 12 Set modulation to SOQPSK/LDPC
MO 13 Set modulation to STC/LDPC
2.1.1.32 Output Clock Measurement - OCM
The Output Clock Measurement command displays measured output clock frequency. Most of the time this is the
same as the commanded bit rate but, depending on encoding/decoding and other factors, this may or may not be the
commanded bit rate.
OCM
- Shows measured clock rate
Example:
OCM
Component A measured datapath rate 0.999998 - commanded 0.999998
Component B measured datapath rate 0.000000 - commanded 0.000000
2.1.1.33 PCM Decoding - PDC
The PCM Decoding command displays and controls PCM digital decoder settings.
PDC [<t>]
- Sets the PCM decoding to <t>
where: <t> - Decoding
NRZL - Non-return-to-zero, level
NRZM - Non-return-to-zero, mark
