Technical Guide: RDMS Telnet and Serial Control
50
Quasonix, Inc.
where: <m> - Mode
L - LDPC
FEC [ASM <t>]
- Sets ASM threshold to <t>, 0 to 65535
2.1.1.22 Force Lock Indication - FL
The FL command displays and controls lock forcing settings.
FL [<l>]
- Sets lock state to <l>
where: <l> - Lock state
0 - Normal operation
1 - Forced active
-1 - Forced inactive
Examples:
FL
Lock is normal
System lock is active
Datapath lock is active
FL 0
Force lock to Normal
FL 1
Force lock to On
FL -1 Force lock to Off
2.1.1.23 FM Demodulator Settings - FM
The FM command displays and controls FM demodulator settings.
Parameter values are explained below.
FM [<p>|S <s>|B <b>|D <m>]
where:
<p>
sets the channel polarity to one of the values below:
•
{0|+} - Active high (normal)
•
{1|-} - Active low (inverted)
OR
S <s>
sets the FM output scale to a value between -128.0 and 128.0
OR
B <b>
sets the FM detector bandwidth to a value between 0.02 MHz and 46.00 MHz
The FM detector bandwidth cannot be less than current bit rate bandwidth (1.40 MHz). Refer to section
2.1.1.23.1 for additional details about the FM B x command.