Document Information
vii
1
Document Information
Document Scope and Purpose
The purpose of this document is to provide instructions and installation procedures for physically
connecting the Quasar Gen II camera. After completing the physical installation, additional setup and
configurations may be required before video analysis and detection can commence.
Note:
This document is intended for use by technical users who have a basic understanding
of CCTV camera/video equipment and LAN/WAN network connections.
Remarque:
Ce document est destiné aux utilisateurs techniciens qui possèdent des connaissances
de base des équipements vidéo/caméras de télésurveillance et des connexions aux
réseaux LAN/WAN.
Warning:
Installation must follow safety, standards, and electrical codes as well as the laws that
apply where the units are being installed.
Avertissement :
L'installation doit respecter les consignes de sécurité, les normes et les codes
électriques, ainsi que la législation en vigueur sur le lieu d'implantation des unités.
Proprietary Rights and Non-Disclosure
This manual is delivered subject to the following restrictions and conditions:
This document contains proprietary information belonging to DVTEL, Inc. This information is
supplied solely for the purpose of assisting explicitly the licensee of the DVTEL units.
No part of this document contents may be used for any other purpose, disclosed to any third
party or reproduced by any means, electronic or mechanical, without the express prior
written permission of DVTEL, Inc.
Trademarks and Copyrights
This manual and its contents herein are owned by DVTEL, Inc. All rights reserved.
DVTEL, the DVTEL logo, Quasar Gen II CM-6208 are trademarks of DVTEL, Inc.
Products and trademarks mentioned herein are for identification purposes only and may be
registered trademarks of their respective companies.
DVTEL, Inc. makes no representations whatsoever about any other products or trademarks
mentioned in the manual.
© DVTEL, Inc. 2014. All rights reserved.
