Quasar CM-6208 User and Installation Guide
54
IR Cut Filter
– Select this checkbox to trigger an event when the IR cut filter is activated. From
the drop-down menu, select
on
to enter Night Mode or
off
to enter Day Mode.
Send message by E-Mail
– Select the checkbox send an alarm message by e-mail when an alarm
is triggered. The e-mail address is entered in the
screen.
Upload image by E-Mail
– Select this checkbox to assign an e-mail address for sending the image
captured by a triggered alarm. The e-mail address is entered in the
screen.
Note:
Images can be sent by e-mail only when MJPEG is selected as the video stream from
the
Video Resolution
screen.
From the
E-Mail address
drop-down list, select one of the two e-mail addresses.
From the
Pre-trigger buffer
and
Post-trigger buffer
drop-down lists, select the number of
frames for the buffer from 1-20 frames.
Figure 58: Triggered Action – Upload Image by E-Mail
Check the
Continue image upload
box if you wish to upload an image by e-mail for a defined
period of time or while the trigger is active. Select one of the following options:
To specify the length of time for the upload, select
Upload for
and enter the number
of seconds in the text box.
To upload while the trigger is active, select
Upload during the trigger active
.
In the
Image Frequency
text box, from the drop-down list select the number of frames per
seconds from 1-15 for the upload.
Note:
Make sure that SMTP configuration has been completed. See
for details.
Record video clip
– Select this box in order to save the alarm-triggered recording to your
microSDXC card or to the NAS. Enter the number of seconds for the pre-trigger buffer. Select the
first radial button if you wish to upload for a specified length of time and enter the number of
